Pressure Transmitter

PRESSURE TRANSMITTER

APPLICATION AND CONSTRUCTION

Smart pressure transmitters are applicable to the measurement of the pressure, under pressure and absolute pressure of gases, vapors , and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminum alloy cast or 316SS stainless steel, degree of protection IP66/IP67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0–340° relative to the sensor, and a choice of cable direction.

The communication standard for data interchange with the transmitter is the Hart protocol.

INSTALLATION

The transmitter can be installed directly on the installation. An universal mounting bracket is provided to transmitter fitting on 2″ pipe (the JU mounting bracket). When the pressure of steam or other hot media is measured, a siphon or impulse line should be used. The needle valve placed upstream the transmitter simplifies installation process and enables the zero point adjustment or the transmitter replacement. When the special process connections are required for the measurement of levels and pressures (e.g. at food and chemical industries), the transmitter is provided with an KLEEV diaphragm seal. Installing accessories and a full scope of diaphragm
seals are described in detail in the further part of the catalogue. The transmitter’s electrical connections should be performed with twisted
cable. The place for the communicator should be assigned before the communicator installation.

PRESSURE TRANSMITTER(EPT)

APPLICATIONS

Smart pressure transmitters are applicable to the measurement of the pressure, under pressure and absolute pressure of gases, vapors and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid. The casing is made of aluminum alloy cast or 316SS stainless steel, degree of protection IP66/IP67. The design of the casing enables the use of a local display, rotation of the display, rotation of the casing by 0–340° relative to the sensor, and a choice of cable direction.

DIFFERENTIAL PRESSURE TRANSMITTER (EDPT)

APPLICATIONS

The EDPT transmitter is applicable to the measurement of differential pressure of gases, vapours and liquids. The active element is a
piezoresistant silicon sensor separated from the medium by separating diaphragms and a specially selected type of manometric fluid.
The special design of the active sensing element ensures that it is able to withstand pressure surges and overloads of up to 250/320/413
bar. The casing is made of aluminum alloy cast or 316SS stainless steel, degree of protection IP66/IP67. The design of the casing
enables the use of a local display, rotation of the display, rotation of the casing by 0–340° relative to the sensor, and a choice of cable
direction.

PRESSURE TRANSMITTER(E310)

Heavy Duty Compact OEM

FOR OTHER OPTIONAL ITEMS, PLEASE CONTACT FACTORY FOR DELIVERY AND MINIMUM QUANTITY OF ORDER.Note : Specifications and dimensions given in this product catalogue represents the state of engineering at the time of printing .Modifications may take place and materials specified may be replaced by others without prior notice.